Socket

Deliver logs to a remote socket endpoint

status: stable delivery: best effort acknowledgements: yes egress: stream state: stateless
Page source Edit this page

Configuration

Example configurations 

{
  "sinks": {
    "my_sink_id": {
      "type": "socket",
      "inputs": [
        "my-source-or-transform-id"
      ],
      "address": "92.12.333.224:5000",
      "mode": "tcp",
      "path": "/path/to/socket"
    }
  }
}
[sinks.my_sink_id]
type = "socket"
inputs = [ "my-source-or-transform-id" ]
address = "92.12.333.224:5000"
mode = "tcp"
path = "/path/to/socket"

---
sinks:
  my_sink_id:
    type: socket
    inputs:
      - my-source-or-transform-id
    address: 92.12.333.224:5000
    mode: tcp
    path: /path/to/socket

{
  "sinks": {
    "my_sink_id": {
      "type": "socket",
      "inputs": [
        "my-source-or-transform-id"
      ],
      "address": "92.12.333.224:5000",
      "mode": "tcp",
      "path": "/path/to/socket",
      "send_buffer_bytes": 65536
    }
  }
}
[sinks.my_sink_id]
type = "socket"
inputs = [ "my-source-or-transform-id" ]
address = "92.12.333.224:5000"
mode = "tcp"
path = "/path/to/socket"
send_buffer_bytes = 65_536

---
sinks:
  my_sink_id:
    type: socket
    inputs:
      - my-source-or-transform-id
    address: 92.12.333.224:5000
    mode: tcp
    path: /path/to/socket
    send_buffer_bytes: 65536

acknowledgements

optional object

Controls how acknowledgements are handled for this sink.

See End-to-end Acknowledgements for more information on how event acknowledgement is handled.

acknowledgements.enabled

optional bool

Whether or not end-to-end acknowledgements are enabled.

When enabled for a sink, any source connected to that sink, where the source supports end-to-end acknowledgements as well, will wait for events to be acknowledged by the sink before acknowledging them at the source.

Enabling or disabling acknowledgements at the sink level takes precedence over any global acknowledgements configuration.

address

required string literal

The address to connect to.

Both IP address and hostname are accepted formats.

The address must include a port.

Examples 
"92.12.333.224:5000"
"https://somehost:5000"
Relevant when: mode = "tcp" or mode = "udp"

buffer

optional object

Configures the buffering behavior for this sink.

More information about the individual buffer types, and buffer behavior, can be found in the Buffering Model section.

buffer.max_events

optional uint
The maximum number of events allowed in the buffer.
Relevant when: type = "memory"
default: 500

buffer.max_size

required uint

The maximum size of the buffer on disk.

Must be at least ~256 megabytes (268435488 bytes).

Relevant when: type = "disk"

buffer.type

optional string literal enum
The type of buffer to use.
Enum options
OptionDescription
disk

Events are buffered on disk.

This is less performant, but more durable. Data that has been synchronized to disk will not be lost if Vector is restarted forcefully or crashes.

Data is synchronized to disk every 500ms.

memory

Events are buffered in memory.

This is more performant, but less durable. Data will be lost if Vector is restarted forcefully or crashes.

default: memory

buffer.when_full

optional string literal enum
Event handling behavior when a buffer is full.
Enum options
OptionDescription
block

Wait for free space in the buffer.

This applies backpressure up the topology, signalling that sources should slow down the acceptance/consumption of events. This means that while no data is lost, data will pile up at the edge.

drop_newest

Drops the event instead of waiting for free space in buffer.

The event will be intentionally dropped. This mode is typically used when performance is the highest priority, and it is preferable to temporarily lose events rather than cause a slowdown in the acceptance/consumption of events.

default: block

encoding

required object
Configures how events are encoded into raw bytes.

encoding.avro

required object
Apache Avro-specific encoder options.
Relevant when: codec = "avro"
encoding.avro.schema
required string literal
The Avro schema.
Examples 
"{ \"type\": \"record\", \"name\": \"log\", \"fields\": [{ \"name\": \"message\", \"type\": \"string\" }] }"

encoding.codec

required string literal enum
The codec to use for encoding events.
Enum options
OptionDescription
avroEncodes an event as an Apache Avro message.
gelfEncodes an event as a GELF message.
jsonEncodes an event as JSON.
logfmtEncodes an event as a logfmt message.
native

Encodes an event in Vector’s native Protocol Buffers format.

This codec is experimental.

native_json

Encodes an event in Vector’s native JSON format.

This codec is experimental.

raw_message

No encoding.

This “encoding” simply uses the message field of a log event.

Users should take care if they’re modifying their log events (such as by using a remap transform, etc) and removing the message field while doing additional parsing on it, as this could lead to the encoding emitting empty strings for the given event.

text

Plain text encoding.

This “encoding” simply uses the message field of a log event. For metrics, it uses an encoding that resembles the Prometheus export format.

Users should take care if they’re modifying their log events (such as by using a remap transform, etc) and removing the message field while doing additional parsing on it, as this could lead to the encoding emitting empty strings for the given event.

Examples 
"avro"
"gelf"
"json"
"logfmt"
"native"
"native_json"
"raw_message"
"text"

encoding.except_fields

optional [string]
List of fields that will be excluded from the encoded event.

encoding.metric_tag_values

optional string literal enum

Controls how metric tag values are encoded.

When set to single, only the last non-bare value of tags will be displayed with the metric. When set to full, all metric tags will be exposed as separate assignments.

Relevant when: codec = "json" or codec = "text"
Enum options
OptionDescription
fullAll tags will be exposed as arrays of either string or null values.
singleTag values will be exposed as single strings, the same as they were before this config option. Tags with multiple values will show the last assigned value, and null values will be ignored.
default: single

encoding.only_fields

optional [string]
List of fields that will be included in the encoded event.

encoding.timestamp_format

optional string literal enum
Format used for timestamp fields.
Enum options
OptionDescription
rfc3339Represent the timestamp as a RFC 3339 timestamp.
unixRepresent the timestamp as a Unix timestamp.

framing

optional object
Framing configuration.

framing.character_delimited

required object
Options for the character delimited encoder.
Relevant when: method = "character_delimited"
framing.character_delimited.delimiter
required uint
The ASCII (7-bit) character that delimits byte sequences.

framing.method

required string literal enum
The framing method.
Enum options
OptionDescription
bytesEvent data is not delimited at all.
character_delimitedEvent data is delimited by a single ASCII (7-bit) character.
length_delimited

Event data is prefixed with its length in bytes.

The prefix is a 32-bit unsigned integer, little endian.

newline_delimitedEvent data is delimited by a newline (LF) character.
Examples 
"bytes"
"character_delimited"
"length_delimited"
"newline_delimited"
Relevant when: mode = "tcp" or mode = "unix"

healthcheck

optional object
Healthcheck configuration.

healthcheck.enabled

optional bool
Whether or not to check the health of the sink when Vector starts up.
default: true

inputs

required [string]

A list of upstream source or transform IDs.

Wildcards (*) are supported.

See configuration for more info.

Array string literal
Examples 
[
  "my-source-or-transform-id",
  "prefix-*"
]

keepalive

optional object
TCP keepalive settings for socket-based components.

keepalive.time_secs

optional uint
The time to wait before starting to send TCP keepalive probes on an idle connection.
Relevant when: mode = "tcp"

mode

required string literal enum
The type of socket to use.
Examples 
"tcp"
"udp"
"unix"
Enum options string literal
OptionDescription
tcpSend over TCP.
udpSend over UDP.
unixSend over a Unix domain socket (UDS).

path

required string literal

The Unix socket path.

This should be an absolute path.

Examples 
"/path/to/socket"
Relevant when: mode = "unix"

send_buffer_bytes

optional uint

The size of the socket’s send buffer.

If set, the value of the setting is passed via the SO_SNDBUF option.

Examples 
65536
Relevant when: mode = "tcp" or mode = "udp"

tls

optional object
Configures the TLS options for incoming/outgoing connections.

tls.alpn_protocols

optional [string]

Sets the list of supported ALPN protocols.

Declare the supported ALPN protocols, which are used during negotiation with peer. Prioritized in the order they are defined.

tls.ca_file

optional string literal

Absolute path to an additional CA certificate file.

The certificate must be in the DER or PEM (X.509) format. Additionally, the certificate can be provided as an inline string in PEM format.

Examples 
"/path/to/certificate_authority.crt"

tls.crt_file

optional string literal

Absolute path to a certificate file used to identify this server.

The certificate must be in DER, PEM (X.509), or PKCS#12 format. Additionally, the certificate can be provided as an inline string in PEM format.

If this is set, and is not a PKCS#12 archive, key_file must also be set.

Examples 
"/path/to/host_certificate.crt"

tls.enabled

optional bool

Whether or not to require TLS for incoming/outgoing connections.

When enabled and used for incoming connections, an identity certificate is also required. See tls.crt_file for more information.

tls.key_file

optional string literal

Absolute path to a private key file used to identify this server.

The key must be in DER or PEM (PKCS#8) format. Additionally, the key can be provided as an inline string in PEM format.

Examples 
"/path/to/host_certificate.key"

tls.key_pass

optional string literal

Passphrase used to unlock the encrypted key file.

This has no effect unless key_file is set.

Examples 
"${KEY_PASS_ENV_VAR}"
"PassWord1"

tls.verify_certificate

optional bool

Enables certificate verification.

If enabled, certificates must be valid in terms of not being expired, as well as being issued by a trusted issuer. This verification operates in a hierarchical manner, checking that not only the leaf certificate (the certificate presented by the client/server) is valid, but also that the issuer of that certificate is valid, and so on until reaching a root certificate.

Relevant for both incoming and outgoing connections.

Do NOT set this to false unless you understand the risks of not verifying the validity of certificates.

tls.verify_hostname

optional bool

Enables hostname verification.

If enabled, the hostname used to connect to the remote host must be present in the TLS certificate presented by the remote host, either as the Common Name or as an entry in the Subject Alternative Name extension.

Only relevant for outgoing connections.

Do NOT set this to false unless you understand the risks of not verifying the remote hostname.

Relevant when: mode = "tcp"

Telemetry

Metrics

link

buffer_byte_size

gauge
The number of bytes current in the buffer.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

buffer_discarded_events_total

counter
The number of events dropped by this non-blocking buffer.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

buffer_events

gauge
The number of events currently in the buffer.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

buffer_received_event_bytes_total

counter
The number of bytes received by this buffer.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

buffer_received_events_total

counter
The number of events received by this buffer.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

buffer_sent_event_bytes_total

counter
The number of bytes sent by this buffer.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

buffer_sent_events_total

counter
The number of events sent by this buffer.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

component_received_event_bytes_total

counter
The number of event bytes accepted by this component either from tagged origins like file and uri, or cumulatively from other origins.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
container_name optional
The name of the container from which the data originated.
file optional
The file from which the data originated.
host optional
The hostname of the system Vector is running on.
mode optional
The connection mode used by the component.
peer_addr optional
The IP from which the data originated.
peer_path optional
The pathname from which the data originated.
pid optional
The process ID of the Vector instance.
pod_name optional
The name of the pod from which the data originated.
uri optional
The sanitized URI from which the data originated.

component_received_events_count

histogram

A histogram of the number of events passed in each internal batch in Vector’s internal topology.

Note that this is separate than sink-level batching. It is mostly useful for low level debugging performance issues in Vector due to small internal batches.

component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
container_name optional
The name of the container from which the data originated.
file optional
The file from which the data originated.
host optional
The hostname of the system Vector is running on.
mode optional
The connection mode used by the component.
peer_addr optional
The IP from which the data originated.
peer_path optional
The pathname from which the data originated.
pid optional
The process ID of the Vector instance.
pod_name optional
The name of the pod from which the data originated.
uri optional
The sanitized URI from which the data originated.

component_received_events_total

counter
The number of events accepted by this component either from tagged origins like file and uri, or cumulatively from other origins.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
container_name optional
The name of the container from which the data originated.
file optional
The file from which the data originated.
host optional
The hostname of the system Vector is running on.
mode optional
The connection mode used by the component.
peer_addr optional
The IP from which the data originated.
peer_path optional
The pathname from which the data originated.
pid optional
The process ID of the Vector instance.
pod_name optional
The name of the pod from which the data originated.
uri optional
The sanitized URI from which the data originated.

connection_errors_total

counter
The total number of connection errors for this Vector instance.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

events_in_total

counter
The number of events accepted by this component either from tagged origins like file and uri, or cumulatively from other origins. This metric is deprecated and will be removed in a future version. Use component_received_events_total instead.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
container_name optional
The name of the container from which the data originated.
file optional
The file from which the data originated.
host optional
The hostname of the system Vector is running on.
mode optional
The connection mode used by the component.
peer_addr optional
The IP from which the data originated.
peer_path optional
The pathname from which the data originated.
pid optional
The process ID of the Vector instance.
pod_name optional
The name of the pod from which the data originated.
uri optional
The sanitized URI from which the data originated.

processed_bytes_total

counter
The number of bytes processed by the component.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
container_name optional
The name of the container from which the bytes originate.
file optional
The file from which the bytes originate.
host optional
The hostname of the system Vector is running on.
mode optional
The connection mode used by the component.
peer_addr optional
The IP from which the bytes originate.
peer_path optional
The pathname from which the bytes originate.
pid optional
The process ID of the Vector instance.
pod_name optional
The name of the pod from which the bytes originate.
uri optional
The sanitized URI from which the bytes originate.

processed_events_total

counter
The total number of events processed by this component. This metric is deprecated in place of using component_received_events_total and component_sent_events_total metrics.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

utilization

gauge
A ratio from 0 to 1 of the load on a component. A value of 0 would indicate a completely idle component that is simply waiting for input. A value of 1 would indicate a that is never idle. This value is updated every 5 seconds.
component_id
The Vector component ID.
component_kind
The Vector component kind.
component_name
Deprecated, use component_id instead. The value is the same as component_id.
component_type
The Vector component type.
host optional
The hostname of the system Vector is running on.
pid optional
The process ID of the Vector instance.

How it works

Health checks

Health checks ensure that the downstream service is accessible and ready to accept data. This check is performed upon sink initialization. If the health check fails an error will be logged and Vector will proceed to start.

Require health checks

If you’d like to exit immediately upon a health check failure, you can pass the --require-healthy flag:

vector --config /etc/vector/vector.toml --require-healthy

Disable health checks

If you’d like to disable health checks for this sink you can set the healthcheck option to false.

State

This component is stateless, meaning its behavior is consistent across each input.

Transport Layer Security (TLS)

Vector uses OpenSSL for TLS protocols due to OpenSSL’s maturity. You can enable and adjust TLS behavior using the tls.* options.
Sidebar